19BXE3 is the Overfill Alert Gauge (Type OF-2-6), a pop-up gauge with aluminum rods, bushings, and thermawell. It has a high-density polyethylene (HDPE) float (float material determined by the depth of the tank). This gauge is designed to be used on IBC Tote Tanks or Drums with depths up to 6" and with a 2" NPT bung opening. The Overfill Alert Gauge is a high level visual gauge designed to visually alert you that your AST (tank) is near full. This overfill monitor's simple pop up mechanical design promotes easy installs, maximum durability, and low up front costs. Excellent gauge material compatibility for: Diesel, Gasoline, Hydraulic Oil, Transmission Fluid, Isopropyl, and more. Other options are available for increased compatibility with various liquids.
Designed to alert when tank is about 90% full
Custom sizes from 6 inches to 40 inches
Available in 2” NPT (.75” NPS and 1.5” NPT models also available)
Multiple material options and accessories available
When ordering specify the exact length needed - every gauge is made custom to fit your tank
Length is the point at which you want the level of the tank to read the overfill
Overfill Gauge Overfill Prevention Ordering Instructions The length of the overfill gauge shall be the distance from the top of your gauge threads to the full mark in your tank. Your full mark should be no less than 90% capacity, and no more than 95% capacity. These measurements will vary depending upon each individual tank. It is the customers responsibility to ensure that we receive the proper measurements for correct overfill warning.