The 30W20B is a 20mm black unlined industry standard cap. This closure is made of polypropylene and fits our 20-400 bottles and jars. Industry standard caps feature a textured top and ribbed sides. The ribbed-sided design allows for ease of use when removing the lid.
The 68WS20 is a 38 x 25 (mm) clear single vertical perforated shrink band for 20mm (20-400 neck finish) standard caps. Shrink bands are a cost-effective way to provide tamper-evident protection to packaged goods. Heat shrink bands are manually applied over and
here.">This 20mm polystyrene white foam coated (PS-22) liner insert incorporates a pressure sensitive coating. Although not a form of tamper evident seal, pressure sensitive liners create a seal that provides an extra level of protection to container contents, as com
The 68W20F is a 20mm one piece foam backed heat induction foil innerseal that provides an aggressive bond with clean peel removal from PE (Polyethylene), LDPE, HDPE and PP (Polypropylene) containers. Heat induction seal (HIS) liners are a popular choice when a
The 68W20H is a 20mm one piece foam backed heat induction foil innerseal that will provide an aggressive bond with clean peel removal from PET and PVC containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clea
The 30W20B is a 20mm black unlined industry standard cap. This closure is made of polypropylene and fits our 20-400 bottles and jars. Industry standard caps feature a textured top and ribbed sides. The ribbed-sided design allows for ease of use when removing the lid.
Polypropylene (PP) is a tough plastic that has excellent chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. Some examples of common products made with PP are dairy and medication containers. Polypropylene is suitable for hot fill applications of up to 205°F and is therefore great for autoclaving. Distortion occurs between 240° to 270° F. It is not recommended for cold or sub-freezing temperatures. The Cary Company has an assortment of polypropylene plastics available for purchase, such as plastic caps and jars, which have a higher tolerance for chemical products. Discover if Polypropylene is appropriate for hot fill application by learning more about What Is Hot Fill Packaging and how it applies to Polypropylene containers.
Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.
Additional Information
More Information
Neck Width
20 mm
Neck Finish
20-400
Cap Liner
Unlined - No Liner
Liner Compatibility
Glass, PE (HDPE, LDPE), PET, PP, PVC, Universal
Color
Black
Material
PP
Dimensions
0.903" x 0.592" (22.936 x 15.037 mm) - Outside
Case Pack
10,225 ea.
Pallet Pack
357,875 ea. (35 Cases)
Case Weight
26 lbs.
Case Dimensions
20.5" x 13.625" x 12.65"
Q & A
Customer Questions
What are the thread details? NPT, BPS, Metric?
Thank you for your question. This closure is a metric cap that fits 20mm 20-400 neck finishes. You can find additional details about this cap on the product drawing here, or by clicking on the Product Specification link below the product description and then clicking on the Specification Sheet link under the Downloads heading. We further recommend requesting a sample of this closure to test this cap's compatibility with your container. Thank you for choosing The Cary Company.
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Did you find what you were looking for?
To request a quote, enter the Part# along with the quantity. To complete the request, fill out the entire form and hit "Submit".