38mm 68 x 25 Clear Perforated Shrink Band

The 68WS38 is a 68 x 25 (mm) clear vertical double perforated shrink band for 38mm (38-400 neck finish) standard caps. Shrink bands are a cost-effective way to provide tamper-evident protection to packaged goods. Heat shrink bands are manually applied over and around the cap of a container. Heat is applied using a heat gun or heat tunnel until the band shrinks and closely fits around the container. Perforation allows for easy removal of the seal.

38mm 68 x 25 Clear Non-perforated Shrink Band

The 68WS36 is a 38mm 68 x 25 clear perforated shrink band for 38mm caps. Shrink bands are a cost-effective way to provide tamper-evident protection to packaged goods. Heat shrink bands are manually applied over and around the cap of a container. Heat is applied using a heat gun or heat tunnel until the band shrinks and closely fits around the container. Perforation allows for easy removal of seal.

38mm Pressure Sensitive Liner, “Sealed for Your Protection” in Red

The 68W39L is a 38mm polystyrene white foam coated (PS-22) liner insert with a pressure sensitive coating. Pressure sensitive liners create an actual seal, providing an extra level of protection compared to a basic foam liner. They are best for dry products and can at times, work with thick liquids such as creams and sauces. Generally, these liners are not recommended for liquids and oils. Material is a styrene foam innerseal coated with a torque activated coating. It has adhesion to glass and plastic bottles with metal or plastic caps.

38mm Foil Heat Induction Liner for HDPE/PP, Clean Peel, FoilSeal™ S70A FS 1-13

The 68W38F is a 38mm one piece foam backed heat induction foil innerseal that provides an aggressive bond with clean peel removal from PE (Polyethylene), LDPE, HDPE and PP (Polypropylene) containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these are recommended for use with liquid products.

38mm Foil Heat Induction Liner for PET/PVC, Clean Peel, FoilSeal™ S70A FS 3-19

The 68W38H is a 38mm one piece foam backed heat induction foil innerseal that will provide an aggressive bond with clean peel removal from PET and PVC containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these are recommended for use with liquid products.