The 67W38F is a 38mm (38-400 neck finish) white unlined dual door flapper cap (sift & spoon). This polypropylene (PP) plastic cap features two snap closures - one side has a wide slot for spoons or pouring, and one side has 3 holes (.225") for controlled dispensing. This closure is a popular option for dry food ingredients such as herbs and spices.
The 30WCW1 is a 3.5 fl. oz. clear polyethylene terephthalate (PET) plastic round packer bottle with a 38mm (38-400) neck finish. Packer bottles, also known as pill packers, vitamin bottles and prescription bottles, are commonly used in the pharmaceutical and
The 30W4CP is a 4 fl. oz. clear polyethylene terephthalate (PET) plastic round packer bottle with a 38 mm (38-400) neck finish. Packer bottles, also known as pill packers, vitamin bottles and prescription bottles, are commonly used in the pharmaceutical and nu
The 30WC15 is a 5 fl. oz. (150 cc) clear polyethylene terephthalate (PET) plastic round packer bottle with a 38mm 38-400 neck finish. Packer bottles, also known as pill packers, vitamin bottles and prescription bottles, are commonly used in the pharmaceutical
This 6 fl. oz. (175 cc) clear polyethylene terephthalate (PET) plastic round packer bottle features a 38mm (38-400) neck finish. This packer bottle, also called a pill packer, vitamin bottle or prescription bottle, is commonly used in the pharmaceutical and nu
This 6.75 fl. oz. (200 cc) clear polyethylene terephthalate (PET) plastic round packer bottle features a 38mm (38-400) neck finish. This packer bottle, also called a pill packer, vitamin bottle or prescription bottle, is commonly used in the pharmaceutical and
The 68WM09 is a 9 fl. oz. clear oblong plastic bottle with a 38 mm, 38-400 neck finish. This bottle is ideal for the food and beverage industry, and is perfect for condiments, sauces, marinades, and more.
The 68WL38 is a 38mm F-217® liner made of three layers: a thin soft polyethylene foam core sandwiched between two clear layers of LDPE film. F-217 has become the industry standard due to its all purpose compatibility, resilient, compressible seal, cleanlin
here.">The 68W37L is a 38mm polystyrene white foam coated (PS-22) liner insert with a pressure sensitive coating. Pressure sensitive liners create an actual seal, providing an extra level of protection compared to a basic foam liner. They are best for dry products an
here.">The 68W39L is a 38mm polystyrene white foam coated (PS-22) liner insert with a pressure sensitive coating. Pressure sensitive liners create an actual seal, providing an extra level of protection compared to a basic foam liner. They are best for dry products an
here.">The 68W35L is a 38mm polystyrene white foam coated (PS-22) liner insert with a pressure sensitive coating. Pressure sensitive liners create an actual seal, providing an extra level of protection compared to a basic foam liner. They are best for dry products an
here.">The 68W36L is a 38mm polystyrene foam aluminum foil (Uni-Foam™ PS-F1) liner insert with a pressure sensitive and torque activated coating. Pressure sensitive liners create an actual seal, providing an extra level of protection compared to a basic foam li
This 38mm one-piece foam-backed universal heat induction foil innerseal will seal to all container materials with varying degrees of adhesion. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provi
The 68W38H is a 38mm one piece foam backed heat induction foil innerseal that will provide an aggressive bond with clean peel removal from PET and PVC containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clea
The 68W38F is a 38mm one piece foam backed heat induction foil innerseal that provides an aggressive bond with clean peel removal from PE (Polyethylene), LDPE, HDPE and PP (Polypropylene) containers. Heat induction seal (HIS) liners are a popular choice when a
This (FoilSeal™ .008” C1S FS 7-6S) 38mm one-piece board-backed heat Induction foil innerseal will provide an aggressive bond with clean peel removal from treated glass and PE (HDPE, LDPE) containers. Heat induction seal (HIS) liners are a popular choice wh
The 68W38N is a 38mm one piece heat induction foil innerseal that features an easy to open clean peel design for use on HDPE and PP containers. This foam polyethylene cap liner has a built-in center pull tab for ease of grip when peeling liners off. Heat induc
The 68W38T is a 38mm one piece single tab heat induction foil innerseal (foam polyethylene cap liner) that features an easy to open design for use on glass containers. Heat induction seal (HIS) liners are a popular choice when an airtight seal is needed. The "
The 68WGT5 is a 38mm one piece tri-tab heat induction foil innerseal (foam polyethylene cap liner) that features an easy to open design for use on glass containers. Heat induction seal (HIS) liners are a popular choice when an airtight seal is needed. The "Cle
The 67W38F is a 38mm (38-400 neck finish) white unlined dual door flapper cap (sift & spoon). This polypropylene (PP) plastic cap features two snap closures - one side has a wide slot for spoons or pouring, and one side has 3 holes (.225") for controlled dispensing. This closure is a popular option for dry food ingredients such as herbs and spices.
Key benefits
Controlled access
Easy-to-open one step dispensing
Audible "snap" ensures freshness and security
One-piece design with no detached parts
Unique thumb detail provides ease of opening
Special cleanout rings prevent material from sifting through closed lid
Polypropylene (PP) is a tough plastic that has excellent chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. Some examples of common products made with PP are dairy and medication containers. Polypropylene is suitable for hot fill applications of up to 205°F and is therefore great for autoclaving. Distortion occurs between 240° to 270° F. It is not recommended for cold or sub-freezing temperatures. The Cary Company has an assortment of polypropylene plastics available for purchase, such as plastic caps and jars, which have a higher tolerance for chemical products. Discover if Polypropylene is appropriate for hot fill application by learning more about What Is Hot Fill Packaging and how it applies to Polypropylene containers.
Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.
Additional Information
More Information
Neck Width
38 mm
Neck Finish
38-400
Cap Dispensing Openings
3 Holes
Cap Liner
Unlined - No Liner
Liner Compatibility
Glass, PE (HDPE, LDPE), PET, PP, PVC, Universal
Cap Dispensing
.225" (3 holes) Sift / Pour (spoon dispenser)
Color
White
Material
PP
Case Pack
2,400 ea.
Pallet Pack
86,400 ea. (36 Cases)
Case Weight
28 lbs.
Pallet Weight
1,050 lbs.
Case Dimensions
22" L x 16" W x 16" H
Pallet Dimensions
48" W x 40" D x 98" H
Industries
Food & Beverage
Country of Manufacture
United States
Q & A
Customer Questions
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Did you find what you were looking for?
To request a quote, enter the Part# along with the quantity. To complete the request, fill out the entire form and hit "Submit".