Part # : 67W4KH
43mm 43-485 Black FlapMate® Cap, 5 Holes, HIS for PET/PVC (Printed)
FoilSeal™ .008" C1S FS 3-25 Heat Induction Foil Innerseal, One-Piece, Clean Peel, "Sealed for Freshness" in Black
The 67W4KH is a 43mm (43-485 neck finish) black FlapMate® flapper cap with a HIS (heat induction liner) for PET (polyethylene terephthalate) and PVC (polyvinyl chloride) bottles. This polypropylene (PP) plastic cap features a snap closure with 5 holes (.200") for dispensing powdered or dry products. It has a butterfly hinge for easy opening and closing and flap that can stay in a wide open position. This closure is a popular option for bulk ingredients such as herbs and spices, confectionery, sweeteners, personal care, grated cheese, and other dry products. Induction liners are a popular choice when a tamper evident air tight seal is needed. These liners are suitable for pharmaceutical, food, and liquid products.
- Quantity Qty Price
- 1 $0.255 ea.
- 1400 $0.204 ea.
- 2800 $0.173 ea.
- Case Pack: 1400 ea.
- Pallet Pack: 58000 ea. (42 Cases)
Shipping Estimates can be found on the Cart page once you add products.
- Specifications
-
The 67W4KH is a 43mm (43-485 neck finish) black FlapMate® flapper cap with a HIS (heat induction liner) for PET (polyethylene terephthalate) and PVC (polyvinyl chloride) bottles. This polypropylene (PP) plastic cap features a snap closure with 5 holes (.200") for dispensing powdered or dry products. It has a butterfly hinge for easy opening and closing and flap that can stay in a wide open position. This closure is a popular option for bulk ingredients such as herbs and spices, confectionery, sweeteners, personal care, grated cheese, and other dry products. Induction liners are a popular choice when a tamper evident air tight seal is needed. These liners are suitable for pharmaceutical, food, and liquid products.
Key benefits:- Controlled access
- Easy-to-open, pain-free one step dispensing
- Audible "snap" ensures freshness and security
- Glossy surface finish suitable for logos or messages on top
- Shift resistance to keep containers clean and avoid product sift
- One-piece design with no detached parts
Cap Liner Type:
FoilSeal™ .008” C1S FS 3-25 Heat Induction Foil Innerseal Composition
This one-piece, board backed heat induction foil innerseal will provide an aggressive bond, yet offer a clean peel when removed from PET and PVC containers. Easy access/"puncture foil" when wax bonded to pulp.Material Standard Metric Backing .008" .2032mm Foil .0005" .0127mm Heat Seal .0005" .0127mm 
Material:
Polypropylene (PP) is a tough plastic that has good chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. Some examples of common products made with PP are dairy and medication containers. Polypropylene is suitable for hot fill applications of up to 165°F and is therefore great for autoclaving. It is not recommended for cold or sub-freezing temperatures. The Cary Company has an assortment of polypropylene plastics available for purchase, such as plastic caps and jars, which have a higher tolerance for chemical products. Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.Additional Information
More Information Neck Width 43 mm Neck Finish 43-485 Cap Liner FoilSeal™ .008" C1S FS 3-25 (One-Piece Heat Induction Foil Innerseal) Liner Compatibility PET, PVC Sealing Characteristics Clean Peel Cap Dispensing .200” (5 holes) Sift Single-Flap Dispenser Color Black Material PP FDA Approved Yes Case Pack 1400 ea. Pallet Pack 58000 ea. (42 Cases) Case Weight 22 lbs. Pallet Weight 954 lbs. Case Dimensions 22" x 16" x 12" Pallet Dimensions 44" x 49" x 88" Industries Food & Beverage Country of Manufacture United States - Q & A
-
Customer Questions
You May Also Like
-
- Quantity Qty Price
- 1 $0.343 ea.
- 1400 $0.243 ea.
- 2800 $0.199 ea.
- 5600 $0.176 ea.
- 14000 $0.153 ea.
1 Review -
- Quantity Qty Price
- 1 $0.255 ea.
- 1400 $0.204 ea.
- 2800 $0.173 ea.
1 Review -
- Quantity Qty Price
- 1 $0.275 ea.
- 1400 $0.219 ea.
- 2800 $0.186 ea.
1 Review -
43mm 43-485 Red FlapMate® Cap, 5 Holes, Unlined
Part #: 67W44R- Quantity Qty Price
- 1 $0.255 ea.
- 1400 $0.194 ea.
- 2800 $0.143 ea.
-
- Quantity Qty Price
- 1 $0.296 ea.
- 1400 $0.236 ea.
- 2800 $0.202 ea.
2 Reviews -
43mm 43-485 Black FlapMate® Cap, 5 Holes, Unlined
Part #: 67W45K- Quantity Qty Price
- 1 $0.255 ea.
- 1400 $0.194 ea.
- 2800 $0.143 ea.