Specifications
The 56WPZU is a chevron blue tear tab pail lid with a gasket that is made of high density polyethylene (HDPE) plastic, which is strong and durable. This lid will fit most 3.5 gallon to 6 gallon plastic pails. The tear-tab or tear skirt creates a tamper-evident seal when placed on a pail and cannot be removed until the tear-tab is torn off. The lid contains a rubber EPDM gasket that creates a stronger seal, helping to preserve the contents of the bucket.

Key benefits:
  • Tamper evident
  • Gasket creates a strong seal to ensure product safety during transport
  • Highly durable
  • Withstand temperatures up to 180°
  • Proudly Made in the USA

The Proof is in the Packaging

Need additional resources to guarantee that your products aren’t being tampered with? Familiarize yourself with Tamper-Proof vs Tamper-Evident Packaging; does one of these promise the impossible? Explore What Is Considered a Tamper-Evident Container and Why They Matter for a better understanding of the characteristics of a tamper-evident container. When in doubt, consult our Guide to Types of Tamper Evident Packaging or 5 Tamper-Evident Packaging Examples for Enhanced Product Security to discover the kinds of tamper-evident packaging available for all industries.



Material:

High-Density Polyethylene PlasticHigh density polyethylene (HDPE ) is the most commonly used resin. This economical plastic has good impact and chemical resistance, is naturally translucent and flexible. It is typically used for personal care products such as shampoo bottles. Adding color will give HDPE an opaque look that will result in an increase in weight and rigidness. We have a variety of these rigid and tough high density polyethylene products in stock, from containers, pails, bottles, caps, tubs and jugs. HDPE works well in below freezing temperatures. HDPE heat compatibility varies. Maximum fill temperature is generally around 171°F; however, testing is recommended with your specific product and application.

Disclaimer:

This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.

Additional Information

More Information
Sealing CharacteristicsTamper Indicating
Pail Lid OptionsStandard
GasketGasket
Capacity3.5 gal., 5 gal., 6 gal.
ColorChevron Blue
MaterialHDPE
FDA CompliantYes
Case Pack72 ea.
Pallet Pack1,152 ea. (16 Cases)
Country of ManufactureUnited States
SeriesP5 Series
Q & A
Customer Questions
How many cubic feet in a 5 gallon pail?
The simple conversion of measurement of 5 gallons is 0.803 cubic feet. However, this is for the nominal capacity of the pail. The actual (overflow) capacity of a pail can vary from model to model. To calculate the full volume in cubic feet, for cylinder pails, you need to multiply π (3.14) x the pail radius (in feet) x the pail height (in feet). To calculate the volume for square pails, multiply the pail's length x width x height (in feet).
Can this plastic pail lid be used for food products?
If the pail lid is FDA approved, then it can be used to store food products.
Some of your plastic pail lids have a spout. What are the benefits of these spouts?
If your plastic pail contains liquids, these spouts offer many benefits. These spouts allow controlled flow of the pail contents as they’re emptied. Many of these spouts can be fitted with pumps that enable dosed dispensing of the pail contents.
Which plastic pail lids fit which plastic pails?
If you look at the product page for any of our pail lids, the compatible pail(s) for that lid will be listed under the Related Products section of the product page. For UN rating compatibility, match the UN ratings of the pail and lid. For example, match a pail with a UN rating of UN1H2/Y12/S to the matching lid that has the same UN rating (UN1H2/Y12/S).
What does the Pail Series mean?
Our plastic pails and lids are classified as part of a designated Series, which makes pairing this plastic lid with a compatible pail easier. Simply match the size (e.g., 5 gallon) and series (P5 Series) of the pail and lid to find a proper fit. For the UN rating to apply, also match the UN rating of the pail to the lid. For example, match a pail with UN rating of UN1H2/Y12/S to the matching lid with the same UN rating (UN1H2/Y12/S).
What is a tear strip on this plastic pail lid and what does it do?
The tear strip on this pail lid offers a tamper-evident seal. Once the lid is attached to the pail, the lid cannot be removed until the tear strip is torn off. Although the tear strip cannot be reattached, the lid itself can be removed and replaced.
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Did you find what you were looking for?
Videos

Videos

You May Also Like