Part # : 68WTM1
128 oz. Natural Tip-N-Measure with 4 oz. Chamber, 33mm 33-400
The 68WTM1 is a natural, high-density polyethylene (HDPE) Tip-N-Measure Plastic Bottle. The Tip-N-Measure Bottle has a 128 fl. oz. capacity, but also includes a separate 4 fl. oz. chamber that allows for precise measuring and dispensing. The two chambers both include a 33 mm (33-400) opening. The 4 fl. oz. dispensing chamber includes a sealed heat induction foil lined child resistant closure. The main chamber also has a 33 mm (33-400) thread size, but caps for this opening are sold separately.
*Caps and closures sold separately. -- Scroll down below to view recommended caps.
- Quantity Qty Price
- 1 $3.950 ea.
- 150 $3.360 ea.
- 360 $3.220 ea.
- 720 $2.870 ea.
- 1080 $2.770 ea.
- Case Pack: 30 ea.
- Pallet Pack: 360 ea. (12 Cases)
Shipping Estimates can be found on the Cart page once you add products.
Quantities above 30 should be even increments of 30.
Quantities above 360 should be even increments of 360.
- Specifications
-
The 68WTM1 is a natural, high-density polyethylene (HDPE) Tip-N-Measure Plastic Bottle. The Tip-N-Measure Bottle has a 128 oz. capacity, but also includes a separate 4 oz. chamber that allows for precise measuring and dispensing. The two chambers both include a 33 mm (33-400) opening. The 4 oz. dispensing chamber includes a sealed heat induction foil lined child resistant closure. The main chamber also has a 33 mm (33-400) thread size, but caps for this opening are sold separately. To use, tip the bottle towards the side with the measuring chamber. Patented fill lines make it easy to transfer a precise quantity to the dispensing chamber. Tip until the desired fluid content (in ounces) is in the measuring chamber. The common applications for this product are concentrated liquids, fertilizer treatments, pest control solutions, food industry, and all liquids needing precise measurement and dispensing.
Key benefits:- FDA approved
- Precise measuring and dispensing
- Patented fill lines
- 2 chamber bottle
- Caps sold separately
Material:
High density polyethylene (HDPE ) is the most commonly used resin. This economical plastic has good impact resistance, is naturally translucent, flexible and typically used for personal care products such as shampoo bottles. Adding color will give HDPE an opaque look that will result in an increase in weight and rigidness. We have a variety of these rigid and tough high density polyethylene products in stock, from containers, pails, bottles, caps, tubs and jugs. HDPE works well in below freezing temperatures. HDPE heat compatibility varies. Maximum fill temperature is generally around 145°F; however, testing is recommended with your specific product and application. Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.Additional Information
More Information Capacity 1 gal., 128 oz. Bottle Style Tip N Measure Color Natural Material HDPE FDA Approved Yes BPA Free Yes Neck Finish 33-400 Neck Width 33 mm Dimensions 7.3" L x 5.34" W x 12.96" H Case Pack 30 ea. Pallet Pack 360 ea. (12 Cases) Industries Agricultural, Animal Care, Industrial, Pharmaceutical Country of Manufacture United States Note: *Caps and closures sold separately. -- Scroll down below to view recommended caps. - Q & A
-
Customer Questions
- Videos
-
Videos
You May Also Like
-
- Quantity Qty Price
- 4200 $1.039 ea.
- 27300 $0.930 ea.
- 54600 $0.890 ea.
-
64 oz. Natural Tip-N-Measure with 4 oz. Chamber, 33mm 33-400
Part #: 68WTM6- Quantity Qty Price
- 5016 $2.180 ea.
- 10032 $2.000 ea.
- 15800 $1.920 ea.