This 26BSA4 pneumatic bottle capping machine can handle screw and lug caps ranging from 18-130mm in diameter. It has an air pressure of 90-125 PSI @4.5 CFM with a torque range of 5-125 inch lbs. and can be used with bottles that have a maximum height of 14 inches. This machine runs on compressed air and therefore requires less hand movement from the operator, reducing unnecessary hand strain. It also provides the repeatable torque accuracy you need to keep your customers and pocketbook happy. Better yet, it comes with a one year warranty for all parts and labor. The Pneumatic Bottle Capping Machine is packaged with a Standard Base.
The 26BLAG is a tabletop pneumatic and electric bottle capping machine bottle gripping base. This base is lever activated and prevents spinning for bottles up to 6.5" in diameter. The four continuously adjustable grippers can be set to center and hold any bott
The 26B9UD is a urethane chuck liner 55 durometer for 89-99mm caps that is inserted within a chuck. The chuck (sold separately) with the inserted liner is attached to the capping machine, which grips the cap during the capping process. This standard liner is c
The 26B9AC is an aluminum chuck with an 89-99mm diameter, used in conjunction with a bottle capping machine. This capping chuck tool is used in a capping machine to hold on to a cap. The chuck with an inserted liner (sold separately), creates a grip that helps
The 26BUD0 is a urethane chuck liner 55 durometer for 15-19mm Caps that is inserted within a chuck. The chuck with the inserted liner is attached to the capping machine which grips the cap during the capping process.
The 26BAC1 is an aluminum chuck for bottle caps with a 19-24mm diameter, used in conjunction with a bottler capper or bottle capping machine. A bottle capping chuck is a tool that is attached to a capping machine that enables the capping machine to grip a cap.
The 26BDC8 is an aluminum deep well chuck for bottle caps with a 25-32mm diameter, used in conjunction with a bottler capper or bottle capping machine. Deep well chucks are the same as standard chucks except they have a secondary cavity that allows them to tig
The 26BDC9 is an aluminum deep well chuck for bottle caps with a 31-37mm diameter, used in conjunction with a bottler capper or bottle capping machine. Deep well chucks are the same as standard chucks except they have a secondary cavity that allows them to tig
The 26BUD3 is a urethane chuck liner 55 durometer for 31-37mm Caps that is inserted within a chuck. The chuck with the inserted liner is attached to the capping machine which grips the cap during the capping process.
The 26BAC4 is an aluminum chuck for bottle caps with a 38-46mm diameter, used in conjunction with a bottler capper or bottle capping machine. A bottle capping chuck is a tool that is attached to a capping machine that enables the capping machine to grip a cap.
The 26BAC7 is an aluminum chuck for bottle caps with a 76-89mm diameter, used in conjunction with a bottler capper or bottle capping machine. A bottle capping chuck is a tool that is attached to a capping machine that enables the capping machine to grip a cap.
The 26BUD7 is a urethane chuck liner 55 durometer for 76-89mm Caps that is inserted within a chuck. The chuck with the inserted liner is attached to the capping machine which grips the cap during the capping process.
The 26BUD8 is a urethane chuck liner 55 durometer for 96-110mm Caps that is inserted within a chuck. The chuck with the inserted liner is attached to the capping machine which grips the cap during the capping process.
The 26BUD9 is a urethane chuck liner 55 durometer for 115-130mm Caps that is inserted within a chuck. The chuck with the inserted liner is attached to the capping machine which grips the cap during the capping process.
How Pneumatic Bottle Capping Machines Work Place the cap loosely on the bottle and then put the bottle on the machine's base. Make sure it rests against the backstop. To start the capping process, the operator will step on on the foot pedal to lower the capping motor with attached chuck onto the cap for tightening. When the chuck touches the cap, this will start the capping motor. In less than a second, the motor tightens the cap and proceeds to shut off automatically, signaling that the tightening process is complete. The operator will then remove his or her foot from the foot pedal. The capping motor with attached chuck will then move off the cap and revert back to its starting position. Remove the newly capped bottle from the machine's base.
The Anti-Rotation Base The Anti-Rotation Base has a high friction rubber surface which prevents the bottle from spinning while being capped.
Superior Torque Accuracy The Pneumatic Capping Machine is known for its torque accuracy. It shuts off automatically when the correct amount of torque is applied to the cap.
Key Benefits:
Tightens caps from 18-130mm
Torque range 5-125 inch lbs.
Maximum bottle height of 14"
Pneumatic operation that runs on compressed air and does not require electricity
Air requirements 90-125 PSI @4.5 CFM
Stainless steel and anodized aluminum construction
External torque adjustment dial
Reversible (can be used as a de-capper)
Quick change chuck
Anti-Rotation base prevents the bottle from rotating
1 year warranty for all parts and labor
Package Includes:
Bottle Capping Machine
Standard Base
Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.
Additional Information
More Information
Color
Mixed
Material
Stainless Steel/Anodized Aluminum
Pallet Pack
10 ea.
Weight
26.3 lbs.
Cap Range
18-130mm
Torque Range
5 - 125 in. lbs.
Air Pressure
90 - 125 PSI @4.5CFM
Q & A
Customer Questions
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Did you find what you were looking for?
To request a quote, enter the Part# along with the quantity. To complete the request, fill out the entire form and hit "Submit".