This pump does feature a metal spring. We do not recommend using it with sodium hypochlorite.

Buttress is coarse thread ("thick") whereas NPT is fine thread ("thin").

If you are interested in a label that wraps around this jar, please email design@thecarycompany.com for assistance.

The 30W8TE trigger sprayer is not all-plastic. The spring is made of steel. We do offer all-plastic trigger sprayers.

We recommend our Part #26WG55 tight head steel drum for gasoline storage. Please note it is up to the end user to ensure proper grounding when using the #26WG55 drum to store gasoline.

Each 5" x 5" White Oil-Only Absorbent Bilge Boom is 5 inches in diameter (5" W x 5" H) and 5 feet long.

This drum pump has a 23mm outlet and a 25.4 mm inlet.

We recommend our Part #26WG55 tight head steel drum for gasoline storage. Please note it is up to the end user to ensure proper grounding when using the #26WG55 drum to store gasoline.

The size heater will depend on the intended application. As this is a band heater designed to fit around an object, the 1.5" might be too narrow to fit around the object you intend to heat. You can reach our sales team at 630.629.6600 or sales@thecarycompany.com for help choosing a heater.

The label dimensions for this plastic jar are 9.0321" W x 1.098" H (100% wrap). If you have further design or labeling questions please contact design@thecarycompany.com .

This immersion heater is made of Incoloy 840 superalloy.

Yes, this honey bottle is compatible with the #68W36W snap top cap. Caps and bottles with matching neck finishes (in this case, 38-400), are typically compatible. Please note that while a cap may fit a bottle, the application and product being dispensed should also be considered.

Please contact our sales team at 630.629.6600 or sales@thecarycompany.com for replacement parts.

These masks are made in China. Please see the product photos for more information.

Unfortunately, no, this standard ramp will not fit your wrapping machine.

Home
Safety Supplies
Aerosol Can Disposal Systems

Aerosol Can Disposal Systems

Safely Depressurize Cans for Easy Disposal

The aerosol can disposal systems and filters allow for safe depressurization and disposal. Select from 1 or 3 can capacity. The systems and filters attach to 30- or 55-gallon tight head drums (depending on the can capacity) with 2" and 3/4" fittings which will then keep the hazardous waste contained and easier to dispose of. After the simple process of depressurization within the sealed chamber, the cans may be recycled and filters can be replaced mess-free. These systems increase safety and reduce the cost of hazardous waste disposal. These aerosol can puncture devices are EPA, RCRA, OSHA and California compliant.