The 68WS49 is an 85.5 x 35 (mm) clear single vertical perforated shrink band for 48mm (48-485 neck finish) dispensing flapper spice caps. Shrink bands are a cost-effective way to provide tamper-evident protection to packaged goods. Heat shrink bands are manually applied over and around the cap of a container. Heat is applied using a heat gun or heat tunnel until the band shrinks and closely fits around the container. Perforation allows for easy removal of the seal.
The 30WHG2 is a 11.7 amps at 120V heat gun and has a temperature range from 120° to 1150°. The 30WHG2 has dual fan speed selector with high and low fan speed settings, as well as a temperature control dial for temperature adjustment. Typical uses inclu
The 30WHG1 is a 5/10 amps at 120V heat gun and has a temperature range from 250 to 1000. Typical uses include bending plastics, curing resins, applying shrink bands, and heating temperature sensitive materials.
The 30WHG3 is a 12.5 amps heat gun and has a temperature range from 572°F to 1000°F with high and low temperature settings. It has deflector and reflector nozzles that protect surfaces, such as glass, yet increases the speed of th
The 67W48F is a 48mm (48-485 neck finish) white unlined dual door flapper cap (sift & spoon). This polypropylene (PP) plastic cap features two snap closures - one side has a wide slot for spoons or pouring, and one side has 7 holes (.200") for controlled dispe
The 67WS48 is a 48mm (48-485 neck finish) White unlined spice cap. This 48mm spice closure is made of polypropylene (PP) plastic and fits our 48mm spice bottles and jars. This cap has a glossy finish and a deep skirt to accommodate a spice jar neck.
The 67WB49 is a 48mm (48-485 neck finish) Black unlined spice cap. This 48mm spice closure is made of polypropylene (PP) plastic and fits our 48mm spice bottles and jars. This cap has a glossy finish and a deep skirt to accommodate a spice jar neck.
The 67WR49 is a 48mm (48-485 neck finish) Red unlined spice cap. This 48mm spice closure is made of polypropylene (PP) plastic and fits our 48mm spice bottles and jars. This cap has a glossy finish and a deep skirt to accommodate a spice jar neck.
The 30W49D is a 48mm (48-400) gold electrolytic tinplate (tin coated steel) cap with a plastisol liner. This closure is typically used on glass bottles, jars, and jugs. This continuous threaded (CT) cap and has a gold exterior and interior with a knurled edge.
The 30W48B is a 48mm (48-400) black electrolytic tinplate (tin coated steel) cap with a white pulp/polyethylene liner, typically used with glass bottles, jars and jugs. This continuous threaded (CT) cap has a black exterior with a gold interior and gold knurle
The 67W48B is a 48mm (48-400 neck finish) Black continuous thread plastic cap with a .035" three-ply co-extruded polyethylene foam liner (F217 style). This closure is made of polypropylene (PP) plastic and fits our 48-400 vials, bottles, and jars. This plastic
The 67WY49 is a 48mm (48-485 neck finish) yellow unlined spice cap. This 48mm spice closure is made of polypropylene (PP) plastic and fits our 48mm spice bottles and jars. This cap has a glossy finish and a deep skirt to accommodate a spice jar neck.
The 68WS49 is an 85.5 x 35 (mm) clear single vertical perforated shrink band for 48mm (48-485 neck finish) dispensing flapper spice caps. Shrink bands are a cost-effective way to provide tamper-evident protection to packaged goods. Heat shrink bands are manually applied over and around the cap of a container. Heat is applied using a heat gun or heat tunnel until the band shrinks and closely fits around the container. Perforation allows for easy removal of the seal.
Material:
Polyvinyl chloride (PVC or V) has fair chemical resistance and is characterized by its streaky yet naturally clear finish. It has a good oxygen barrier, which makes it suitable for salad oils and vinegar. PVC is not compatible with solvents. General PVC will distort at 170°F and is not suitable for hot filled applications. We stock over hundreds of polyvinyl chloride based products, such as square jugs that can hold industrial solutions and oblong jars, which can store dry products. We also have cylinder bottles that can be used with cleaning solutions and shampoos.
Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.
Additional Information
More Information
Color
Clear
Neck Width
48 mm
Perforation
Vertical Double Perforation
Material
PVC
Case Pack
5,000 ea. (25 Bundles)
Pallet Pack
500,000 ea.
Country of Manufacture
United States
Note:
Shrink bands are bundled in packs of 200 ea.
Q & A
Customer Questions
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Did you find what you were looking for?
Videos
Videos
To request a quote, enter the Part# along with the quantity. To complete the request, fill out the entire form and hit "Submit".