Specifications
Our configurable size #2 high flow pleated filter cartridges feature inside to outside flow at micron ratings from 0.45 to 40 micron. These filter cartridges seal into standard bag filter housings offering higher efficiencies, flow rates and loading capacities than many standard filter bags. As the filtered particulate is stored on the inside of the element, the risk of potential contamination is minimized during change out. Common applications include: water filtration, fine chemicals, pre-filtration, food & beverage, etc.

These customizable high flow pleated filter cartridges come in either polypropylene or microglass filtration media and polypropylene or polyester support media. All materials of construction comply with FDA regulations for food and beverage contact, and all polypropylene components meet the specifications for biological safety per USP Class VI-121° C for plastics. Maximum operating conditions are a maximum differential pressure of 50 PSID and maximum temperature of 160° F | 71° C. Select your required specifications with both absolute and nominal retention available as well as multiple end cap style configurations.

Key benefits
  • Fits into most standard bag filter housings
  • High efficiencies, flow rates, loading capacities at low initial pressure drops
  • Inside to outside flow design
  • Maximum differential pressure of 50 PSID
  • Maximum operating temperature of 160° F | 71° C
  • Broad chemical compatibility
  • Available with polypropylene (PP) or microglass filtration media
  • Configurable end cap style
  • Absolute or nominal retention

Typical Applications: Process Water, Food & Beverage, Cosmetics, Produced Water, Waste Water, Deionized Water, Fine Chemicals, Reverse Osmosis Membrane Pre-Filtration, Amines, etc.

Material:

Polypropylene PlasticPolypropylene (PP) is a tough plastic that has good chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. Some examples of common products made with PP are dairy and medication containers. Polypropylene is suitable for hot fill applications of up to 165°F and is therefore great for autoclaving. It is not recommended for cold or sub-freezing temperatures. The Cary Company has an assortment of polypropylene plastics available for purchase, such as plastic caps and jars, which have a higher tolerance for chemical products.

Disclaimer:

This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.

Additional Information

More Information
MaterialPP
Size2 (7.06" x 32")
Micron RatingConfigurable
Case Pack1 ea.
Case Weight5 lbs.
Case Dimensions9" L x 9" W x 25" H
Pallet Pack48 ea. (48 Cases)
Pallet Weight240 lbs.
Pallet Dimensions40x48x81
FDA CompliantYes
Weight5 lbs.
Country of ManufactureUnited States
Note:Complies with US 21 CFR; and EU Directives 2002/72/EC, 1935/2004, and/or 10/2011.
Q & A
Customer Questions
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Did you find what you were looking for?
Videos

Videos

You May Also Like