Part # : 26WT14
2" NPS Tri-Sure® Plastiplug™, Viton Gasket
The 26WT14 is a 2" NPS Tri-Sure® Plastiplug™ plastic drum plug with a Viton gasket specially designed for sealing industrial plastic barrels, plastic drums, plastic pails and IBCs. Plastiplug™ threaded plastic plugs are manufactured from polypropylene (PP) plastic and provide superior versatility for use with all opening styles produced by plastic barrel, drum, and pail manufacturers as well as IBC producers. Plastiplug™ plastic plugs have an excellent finish, dimensional consistency, and sealing performance. Viton® gaskets have excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic solvents and chemicals.
*For Poly (plastic) Drums
- Quantity Qty Price
- 400 $3.550 ea.
- 4000 $3.330 ea.
- 10800 $3.120 ea.
- Case Pack: 400 ea.
- Pallet Pack: 10,800 ea.
Related Products
| Product | Price | Qty | Request |
|---|---|---|---|
 Tri-Sure® Aluminum Drum Plug Wrench for Plastic Plugs The 26WTAW is a Tri-Sure® aluminum drum plug wrench for 2" & 3/4" plastic plugs |
| | |
 Barrel Buddies II Universal Drum Plastic Wrench The 26W166 is a Universal Drum Wrench. It fits 2" and 3/4" drum bungs, and the slotted cavity on the back works as a gas shutoff wrench. |
| | |
 2" Tri-Sure® Push-Lock Cap™ LDPE Plastic Capseal The 26WST4 is a 2" Tri-Sure Push-Lock white All-Plastic cap seal for use on plastic drums with Tri-Sure 2' PLASTIPLUG drum plugs. Cap seals provide extra protection from any tampering, contamination, or damage to the product. The 26WST4 can be applied and remo |
| | |
 2" Tri-Sure® ClickLock Cap PP Plastic Capseal (Solid White) The 26WCL2 is a 2" white Tri-Sure CLICKLOCK 2 all plastic cap seal for use on plastic drums. This cap seal is tamper evident and can be easily applied by hand without tools. |
| |
- Specifications
- Tri-Sure® Plastiplug™
Proven globally on millions of plastic containers, Plastiplug™ plastic plugs can now accommodate the uniquely designed all-plastic tamper evident Push-Lock™ cap.
Key benefits:- Designed to meet the special characteristics of plastic containers.
- Push-Lock™ compatible for maximum all-plastic tamper-evidence.
- Full range of Tri-Sure® closing tools and adaptors for optimal sealing performance.
- The entire range of Plastiplug™ plastic plugs is compliant with ISO-20848 Part 3.
- Proudly Made in the USA
Viton® gaskets have excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic solvents and chemicals. Low temperature resistance is normally not favorable and for static applications is limited to approximately -15°F (-26°C) although in certain situations it is suitable down to -40°F (-40°C). Under dynamic conditions, the lowest service temperature is between 5°F and 0°F (-15°C and -18°C). Gas permeability is very low and similar to that of butyl rubber. Special fluorocarbon compounds exhibit an improved resistance to acids, fuels, water and steam.Material:
Polypropylene (PP) is a tough plastic that has excellent chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. Some examples of common products made with PP are dairy and medication containers. Polypropylene is suitable for hot fill applications of up to 205°F and is therefore great for autoclaving. Distortion occurs between 240° to 270° F. It is not recommended for cold or sub-freezing temperatures. The Cary Company has an assortment of polypropylene plastics available for purchase, such as plastic caps and jars, which have a higher tolerance for chemical products. Discover if Polypropylene is appropriate for hot fill application by learning more about What Is Hot Fill Packaging and how it applies to Polypropylene containers.Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.Please note, this item is excluded from online promotions.
Additional Information
More Information Neck Width 2" Gasket Viton Gasket Drum Type Poly Drums Thread 4 NT NPS Color White Material PP Case Pack 400 ea. Pallet Pack 10,800 ea. Model PPG213 Note: *For Poly (plastic) Drums - Q & A
- Customer Questions
You May Also Like
- Quantity Qty Price
- 1 5.360 ea.
- 100 4.100 ea.
- 400 3.790 ea.
- 2000 3.510 ea.
- Quantity Qty Price
- 1 2.500 ea.
- 200 2.220 ea.
- 400 1.630 ea.
- 1200 1.530 ea.
2 reviews
3/4" NPS Tri-Sure® Plastiplug™, EPDM Gasket
Part #: 56W4TN- Quantity Qty Price
- 1 1.130 ea.
- 100 0.912 ea.
- 300 0.664 ea.
- 500 0.628 ea.
- 900 0.628 ea.
2" NPS Tri-Sure® Plastiplug™ with Vent, EPDM Gasket
Part #: 26W2VN- Quantity Qty Price
- 1 5.430 ea.
- 50 4.860 ea.
- 200 3.750 ea.
- 400 3.510 ea.
- 800 3.280 ea.
2" NPS Tri-Sure® Plastiplug™, EPDM Gasket
Part #: 56W2TN- Quantity Qty Price
- 1 2.170 ea.
- 200 1.890 ea.
- 400 1.380 ea.
- 1200 1.340 ea.
- 10800 1.310 ea.