UltraTech 8434 - 15' x 66' Spill Containment Berm, Rapid Rise Model

One of the main advantages of the Rapid Rise Model is that the sidewalls stay out of the way until they are needed. Foam in the top, outer perimeter of this containment berm's sidewalls raise the walls with the level of the liquid should there be a spill while rigid struts provide added support. But the walls stay down and flat during normal, day-to-day, operations. Helps comply with SPCC and EPA spill containment regulations.

Key benefits:

• Sidewalls remain down during normal operations, loading and unloading. Vehicles and equipment can drive in and out with no set-up or takedown required.
• In the case of a spill, the foam ring around the top perimeter of the Containment Berm rises with the level of spilled liquid.
• Standard materials include PVC and Copolymer 2000™.
• Proudly Made in the USA.

Sidewalls:

• Lay fl at unless spill occurs - foam ring will rise with liquid level.
• Eliminates tripping hazards.
• No set-up required once Berm has been positioned in the field.

Compliance:

• EPA 40 CFR 264.175 Containment of Containers Containing Free Liquid.
• SPCC - Spill Prevention, Control and Countermeasure Act.

Chemical Compatibility - Copolymer 2000™, Urethane and XR-5
According to EPA guidelines, spills must be cleaned up within 24 hours and any secondary containment areas must be inspected once a week. The chart below lists chemical compatibility of Copolymer 2000, Urethane and XR5. The information has been developed from industry available data and offers compatibility based on exposure of one week or less.

UltraTech's Chemical Compatibility Guide