20mm Foil Heat Induction Liner for HDPE/PP, Clean Peel, FoilSeal™ S70A FS 1-13

The 68W20F is a 20mm one piece foam backed heat induction foil innerseal that provides an aggressive bond with clean peel removal from PE (Polyethylene), LDPE, HDPE and PP (Polypropylene) containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these are recommended for use with liquid products.

20mm Foil Heat Induction Liner for Glass/HDPE, Clean Peel, FoilSeal™ .008" C1S FS 7-6S

68W20G is a (FoilSeal™ .008” C1S FS 7-6S) 20mm one-piece board-backed heat Induction foil innerseal which will provide an aggressive bond with clean peel removal from treated glass and PE (HDPE, LDPE) containers. Heat induction seal (HIS) liners are a popular choice when an airtight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure-sensitive liners, these are recommended for use with liquid products.

20mm Foil Heat Induction Liner for PET/PVC, Clean Peel, FoilSeal™ S70A FS 3-19

The 68W20H is a 20mm one piece foam backed heat induction foil innerseal that will provide an aggressive bond with clean peel removal from PET and PVC containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these are recommended for use with liquid products.

20mm Lift & Peel Foil Heat Induction Liner for HDPE/PP, Clean Peel, Lift 'n' Peel™ U5 LP-E

The 68W20N is a 20mm one piece heat induction foil innerseal that features an easy to open clean peel design for use on HDPE and PP containers. This foam polyethylene cap liner has a built-in center pull tab for ease of grip when peeling liners off. Heat induction seal (HIS) liners are a popular choice when an airtight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these liners are recommended for use with liquid products. This liner is applicable with products like edible oils, food and beverages, vitamins, shampoos, and spices.

20mm Single-Tab Foil Heat Induction Liner for Glass/HDPE, Clean Peel, FoilSeal™ S70A FS 7-6S

The 68W20T is a 20mm one piece single tab heat induction foil innerseal (foam polyethylene cap liner) that features an easy to open design for use on glass containers. Heat induction seal (HIS) liners are a popular choice when an airtight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these liners are recommended for use with liquid products. This liner is applicable with products like edible oils, food and beverages, vitamins, shampoos, and spices.

20mm Foil Heat Induction Liner, Universal, Clean Peel, FoilSeal™ S70A FS 5-9

The 68W20U is a 20mm one-piece foam-backed universal heat induction foil innerseal that will seal to all container materials with varying degrees of adhesion. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure-sensitive liners, these are recommended for use with liquid products.

20mm Tri-Tab Foil Heat Induction Liner for Glass/HDPE, Clean Peel, FoilSeal™ S70A FS 7-6S

The 68WGT0 is a 20mm one piece tri-tab heat induction foil innerseal (foam polyethylene cap liner) that features an easy to open design for use on glass containers. Heat induction seal (HIS) liners are a popular choice when an airtight seal is needed. The "Clean Peel" liners provide an aggressive bond with clean peel removal but are not tamper-evident. An induction machine is required to apply the liner. Unlike pressure sensitive liners, these liners are recommended for use with liquid products. This liner is applicable with products like edible oils, food and beverages, vitamins, shampoos, and spices.

20mm F-217® Three-ply Foam Liner

The 68WL20 is a 20mm F-217® liner made of three layers: a thin soft polyethylene foam core sandwiched between two clear layers of LDPE film. F-217 has become the industry standard due to its all purpose compatibility, resilient, compressible seal, cleanliness (no pulp dust) and economy. F-217 liners are taste and odor resistant, and have a low moisture transmission rate, meaning they prevent moisture from entering the bottle and affecting products. F-217 is a brand-name and tends to be used interchangeably with foam liner. However, F-217 actually performs better than a regular foam liner. Like the foam liner, this also does not create an airtight seal.

20mm 38 x 25 Clear Perforated Shrink Band

The 68WS20 is a 38 x 25 (mm) clear vertical double perforated shrink band for 20mm (20-400 neck finish) standard caps. Shrink bands are a cost-effective way to provide tamper-evident protection to packaged goods. Heat shrink bands are manually applied over and around the cap of a container. Heat is applied using a heat gun or heat tunnel until the band shrinks and closely fits around the container. Perforation allows for easy removal of the seal.

20mm 46 x 28 Clear Perforated Shrink Band for 20mm Child Resistant Cap & Dropper

The 68WSC0 is a 46 x 28 (mm) clear single vertical perforated shrink band for 20mm child resistant caps and droppers. Shrink bands are a cost-effective way to provide tamper-evident protection to packaged goods. Heat shrink bands are manually applied over and around the cap of a container. Heat is applied using a heat gun or heat tunnel until the band shrinks and closely fits around the container. Perforation allows for easy removal of the seal.