What is induction cap sealing? Induction sealing is the non-contact heating process that accomplishes the hermetic sealing of a container with a closure that includes a heat sealable foil laminate inside of the closure. A common type of innerseal is a 2 pieces innerseal which leaves a secondary seal inside the caps once the induction seal has been removed. This is commonly used where issues of leakage are a concern. Another option is the single piece innerseal, where once the induction seal is removed there is no liner left in the closure. You can also choose from seals that have a pulltab or ones that have a peelable seal leaving no residue on the bottle. You must be certain that the liner is compatible with the bottle material.

Cary Code# 26BIS6 -w/ 60mm Diameter Head
- capable of sealing most 10mm-53mm closures
Cary Code# 26BIS8 -w/ 80mm Diameter Head
- capable of sealing most 28mm-70mm closures

**PLEASE NOTE SAMPLE CAPS WILL BE REQUIRED FOR TESTING TO ASSURE TOOL WORKS WITH THE CAPS BEING USED**

Product Description: Manual Hand Held Induction Sealer
This manual hand held induction sealer is compact and versatile. It is suitable for use on various types of bottles and cap sizes. Position the sealing head on the cap and press the button. When the seal is complete an audible tone signals you to move on to the next container.

Features:
- Capable of sealing from 10mm up to 80mm closures
- Easy setup and simple operation
- Power supply with advanced circuitry
- High reliability
- Self-test circuitry to stabilize frequency
- Over-current and over-voltage protection to ensure smooth operation
- No water required for cooling
- Complete with flexible cable and a hand applicator
- Single phase, 500W, AC 110V, 50/60Hz, 6A

Typical Speed: 400 – 600 bottles per hour depending on cap specifications

Cap Sizes: 10mm – 80mm

Power Input: 500 Watts Power Consumption 5 amps Frequency 100 KHz +/- 5%

Dimensions: 10.4L x 9.8W x 3.9H (in)

Machine Weight: 11 lbs

**PLEASE NOTE SAMPLE CAPS WILL BE REQUIRED FOR TESTING TO ASSURE TOOL WORKS WITH THE CAPS BEING USED**