The Leak Type K-2 Gauge is a reliable, vertical type leak monitor used for detecting leaks in the annular/interstitial space of a double wall above ground containment tank (AST's) with a 2" NPT bung opening. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. If you have a monitoring pipe or have a threaded fitting at the top of the interstitial space on a double wall containment tank, this monitor will thread right in. Any liquid seeping into the containment space will cause the float to rise which will provide a visual indication on top of the tank that there is liquid in the interstitial containment area.
**Custom configure this product with the options below
19BXF5 is the At-A-Glance™ audible and flashing light feature alarm with a time out feature, that mounts directly to the gauge for a Drum or IBC Tank and has Dry Contacts. This item can provide High Liquid Level Alarms, Overfill Tank Alarm, Leak Detection Alarm,... Low Level Alarm, and Interstitial Alarms. With this model, there is an audible alarm with an added set of dry contacts, flashing light and time-out feature. This allows you to use the dry contacts while having a visual and audible application
19BFX5 is the At-A-Glance™ flashing light feature (no audible) alarm that mounts directly to the gauge for a Drum or IBC Tank. This item can provide High Liquid Level Alarms, Overfill Tank Alarm, Leak Detection Alarm, Low Level Alarm, and Interstitial Alarms. With... this model, the audible alarm is replaced with a set of dry contacts. The dry contacts are not designed to power anything. These contacts can then be used to trigger a switch on your own system, thus turning a pump on or off, triggering your own alarm. Standard dry contacts option with flashing light
19BXE4 is the At-A-Glance™ flashing light and audible fill alarm with time-out, that mounts remotely to the gauge for a Drum or IBC Tank. This item can provide High Liquid Level Alarms, Overfill Tank Alarm, Leak Detection Alarm, Low Level Alarm and Interstitial... Alarms. With this model, there is an audible alarm with an added flashing light and time-out feature. The flashing light will alert when triggered by the magnetic indicator on the gauge. The time-out feature will shut down the alarm after 20 seconds to save on battery life. This includes 25 feet of cable to allow for remote access
19BXF6 is the At-A-Glance™ flashing light (no audible) fill alarm that mounts remotely to the gauge for a Drum or IBC Tank. This item can provide High Liquid Level Alarms, Overfill Tank Alarm, Leak Detection Alarm, Low Level Alarm, and Interstitial Alarms. With... this model, the audible alarm is replaced with a flashing light. The flashing light will alert when triggered by the magnetic indicator on the gauge and continue until reset. This includes 25 feet of cable to allow for re-mote access
26BRMA is the At-A-Glance™ audible fill alarm that mounts remotely to the gauge for a Drum or IBC Tank. This item can provide High Liquid Level Alarms, Overfill Tank Alarm, Leak Detection Alarm, Low Level Alarm, and Interstitial Alarms. Attain a visual indication... as well as an audible indication of your tank level using only one fitting on your tank. No more worries about not being able to hear your vent alarm. At 110db, this overfill alarm will make you stand up and take notice. An easy inexpensive solution to all of your audible liquid level tank alarm needs. 25' of cable including connectors
19BXF4 is the At-A-Glance™ audible and flashing light feature alarm with a time out feature, that mounts directly to the gauge for a Drum or IBC Tank. This item can provide High Liquid Level Alarms, Overfill Tank Alarm, Leak Detection Alarm, Low Level Alarm, and... Interstitial Alarms. An easy inexpensive solution to all of your audible liquid level tank alarm needs. With this model, there is an audible alarm with an added flashing light and time-out feature. The flashing light will alert when triggered by the magnetic indicator on the gauge. The time-out feature will shut down the alarm after 20 seconds to save on battery life
19BXF1 is the At-A-Glance™ flashing light feature (no audible) alarm that mounts directly to the gauge for a Drum or IBC Tank. This item can provide High Liquid Level Alarms, Overfill Tank Alarm, Leak Detection Alarm, Low Level Alarm, and Interstitial Alarms. An... easy inexpensive solution to all of your audible liquid level tank alarm needs. The flashing light will alert when triggered by the magnetic indicator on the gauge and continue until reset
19BLED is the LED At-A-Glance™ gauge system is an electronic remote read that accurately and reliably measures the fuel level in your fuel tank. It will transmit and display the level information to a wired LED display located in a convenient location on your premises.... By mounting the magnetic sensor to a level gauge on your tank, you can remotely monitor that tank with a wired LED display up to 100 feet away. Quick and easy installation: Four screws, position the magnet, run the wire, mount the display. That's all it takes to add a remote level gauge to your storage tank. This gauge system works well with a 9V Lithium battery (not included)
19BXF7 is the At-A-Glance™ flashing light (no audible) fill alarm that mounts remotely to the gauge for a Drum or IBC Tank. This item can provide High Liquid Level Alarms, Overfill Tank Alarm, Leak Detection Alarm, Low Level Alarm, and Interstitial Alarms. With... this model, the audible alarm is replaced with a set of dry contacts. The dry contacts are not designed to power anything. These contacts can then be used to trigger a switch on your own system, thus turning a pump on or off, triggering your own alarm
19BXF3 is the At-A-Glance™ audible fill alarm that mounts directly to the gauge for a Drum or IBC Tank. This item can provide High Liquid Level Alarms, Overfill Tank Alarm, Leak Detection Alarm, Low Level Alarm, and Interstitial Alarms. Attain a visual indication... as well as an audible indication of your tank level using only one fitting on your tank. No more worries about not being able to hear your vent alarm. At 110db, this overfill alarm will make you stand up and take notice. An easy inexpensive solution to all of your audible liquid level tank alarm needs
The Leak Type K-2 Gauge is a reliable, vertical type leak monitor used for detecting leaks in the annular/interstitial space of a double wall above ground containment tank (AST's) with a 2" NPT bung opening. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. If you have a monitoring pipe or have a threaded fitting at the top of the interstitial space on a double wall containment tank, this monitor will thread right in. Any liquid seeping into the containment space will cause the float to rise which will provide a visual indication on top of the tank that there is liquid in the interstitial containment area.
Key benefits:
Designed to detect leaks in double wall containment systems, interstitial spaces, and monitoring pipes
Custom sizes from 6 inches to 170 inches
Available in 1.5" NPT opening for sizes 6" to 76"
Available in 2" NPT opening for sizes 6" to 170"
Available in .75" NPS opening for sizes 6" to 76"
Simple and effective
Third party testing documents available
When ordering specify your size opening and exact tank depth,every gauge is made custom to fit your tank
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.
Please note, this item is excluded from online promotions.
Additional Information
More Information
Gasket
Nitrile (Buna-N)
Country of Manufacture
United States
Model
Type K-2
Opening Size
2" NPT
Rod Material
Galvanized Steel
Bushings Material
Aluminum
Float Material
HDPE
Calibration
Plastic Calibration
Note:
**Custom configure this product with the options below
Q & A
Customer Questions
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Did you find what you were looking for?
To request a quote, enter the Part# along with the quantity. To complete the request, fill out the entire form and hit "Submit".