The 30W20T is a 20mm (20-410) White Spouted Turret Cap. This closure has a spout with a 3mm orifice that pops up for dispensing and levels with the top of the cap when not in use. It has a land seal, which is a flat surface in the cap that touches the land of the plastic bottle. Turret caps are commonly used for a variety of thin liquids.
The 68WL20 is a 20mm F-217® liner made of three layers: a thin soft polyethylene foam core sandwiched between two clear layers of LDPE film. F-217 has become the industry standard due to its all purpose compatibility, resilient, compressible seal, cleanlin
here.">This 20mm polystyrene white foam coated (PS-22) liner insert incorporates a pressure sensitive coating. Although not a form of tamper evident seal, pressure sensitive liners create a seal that provides an extra level of protection to container contents, as com
The 68W20H is a 20mm one piece foam backed heat induction foil innerseal that will provide an aggressive bond with clean peel removal from PET and PVC containers. Heat induction seal (HIS) liners are a popular choice when an air tight seal is needed. The "Clea
The 68W20F is a 20mm one piece foam backed heat induction foil innerseal that provides an aggressive bond with clean peel removal from PE (Polyethylene), LDPE, HDPE and PP (Polypropylene) containers. Heat induction seal (HIS) liners are a popular choice when a
68W20G is a (FoilSeal™ .008” C1S FS 7-6S) 20mm one-piece board-backed heat Induction foil innerseal which will provide an aggressive bond with clean peel removal from treated glass and PE (HDPE, LDPE) containers. Heat induction seal (HIS) liners are a popu
The 68W20N is a 20mm one piece heat induction foil innerseal that features an easy to open clean peel design for use on HDPE and PP containers. This foam polyethylene cap liner has a built-in center pull tab for ease of grip when peeling liners off. Heat induc
The 68W20T is a 20mm one piece single tab heat induction foil innerseal (foam polyethylene cap liner) that features an easy to open design for use on glass containers. Heat induction seal (HIS) liners are a popular choice when an airtight seal is needed. The "
The 30W20T is a 20mm (20-410) White Spouted Turret Cap. This closure has a spout with a 3mm orifice that pops up for dispensing and levels with the top of the cap when not in use. It has a land seal, which is a flat surface in the cap that touches the land of the plastic bottle. Turret caps are commonly used for a variety of thin liquids.
Material:
Polypropylene (PP) is a tough plastic that has excellent chemical resistance. PP is translucent in its natural state but can have a glossy finish when produced with color. Some examples of common products made with PP are dairy and medication containers. Polypropylene is suitable for hot fill applications of up to 205°F and is therefore great for autoclaving. Distortion occurs between 240° to 270° F. It is not recommended for cold or sub-freezing temperatures. The Cary Company has an assortment of polypropylene plastics available for purchase, such as plastic caps and jars, which have a higher tolerance for chemical products. Discover if Polypropylene is appropriate for hot fill application by learning more about What Is Hot Fill Packaging and how it applies to Polypropylene containers.
Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.
Additional Information
More Information
Neck Width
20 mm
Neck Finish
20-410
Cap Liner
Unlined - No Liner
Liner Compatibility
Glass, PE (HDPE, LDPE), PET, PP, PVC, Universal
Color
White
Material
PP
Case Pack
2,750 ea.
Pallet Pack
55,000 ea.
Country of Manufacture
United States
Q & A
Customer Questions
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Did you find what you were looking for?
Videos
Videos
To request a quote, enter the Part# along with the quantity. To complete the request, fill out the entire form and hit "Submit".