• Spill Control & Containment
  • Temperature Control & Heaters
  • Additional Products/Supplies
  • Clearance
    • Specifications
    • Q & A
    Specifications
    Experience ease of dispensing with this vertical-lift drum pourer for full (800 lb.) or half full (500 lb.) 55 gallon drums. This lifter boasts a 106" maximum dispensing height, perfect for standard vats, hoppers, mixers, and alike. The lifter's AC Power lift and tilt controls allow for 360 degree rotation forward and backward. Simply hold the momentary switch and lift the valve to raise the drum. A second valve controls the hydraulically-driven drum tilt. The manual release valve lowers the drum. This lifter's 1 HP Single-Phase AC Motor needs to be plugged into a 115V 60Hz power supply. Please note this lifter is not intended for use in hazardous areas. Additionally, keep in mind that a half-full, bottom-heavy drum is harder to tilt than a full drum. Key benefits:
    • Lifts drum 106" off ground
    • AC Motor power lift and tilt
    • 360° rotation with easy-to-use controls
    • Suggested capacities: full drum (800 lb.) or half full drum (500 lb.)
    • Use with Part# 26BMP7 for plastic and fiber drums

    Disclaimer:

    This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.

    Additional Information

    More Information
    ColorBlue
    MaterialMetal
    Dimensions74" L x 48" W x 83" H
    Pallet Pack1 ea.
    Pallet Dimensions74" L x 48" W x 83" H
    Pallet Weight849 lbs.
    Weight804 lbs.
    Country of ManufactureUnited States
    Load Capacity800 lbs.
    Raised Height106"
    Note:We highly suggest using Part# 26BMP7 to prevent slipping for plastic and fiber drums.
    Please note this lifter is NOT intended for use in hazardous areas.
    Q & A
    Customer Questions
    Did you find what you were looking for?

    You May Also Like