• Spill Control & Containment
  • Temperature Control & Heaters
  • Additional Products/Supplies
  • Clearance
    • Specifications
    • Q & A
    Specifications
    19B685 is a 120v HL101 digital benchtop temperature limit controller with a Fahrenheit (° F) display and J-type thermocouple. Temperature limit controllers add a current cutoff to existing temperature controllers based on reaching or exceeding a programmed high-limit setpoint temperature. HL101 temperature controllers feature a 4-key touch pad interface with manual reset and display the high limit or current temperature. Must be used with a temperature controller, sold separately.

    About BriskHeat® HL101 Digital Benchtop Temperature Limit Controllers
    BriskHeat® HL101 digital benchtop temperature limit controllers add a current cutoff to existing temperature controllers or devices with a built-in temperature control based on reaching or exceeding a programmed high-limit setpoint temperature. Common applications for these temperature limit controllers include: research and development testing, temperature-critical processes, equipment over-heat protection, adhesive curing and applications where alarm latching is required.

    HL101 temperature limit controllers feature a benchtop, plug-and-play design with a 4-key touch pad interface with manual reset. These controllers can display high limit or current temperature and are available with a Fahrenheit (° F) or Celsius (° C) display. Temperature control range is 0° F to 999° F (0° C to 999° C). Accuracy is +/-1% full scale.

    HL101 controllers include a 5' (1.5 m) long input cord. The 120v units include a NEMA 5-15 input plug while the 240v models have a NEMA 6-15 plug. A 10' temperature sensor is also included available in both J-type and K-type thermocouples. Maximum amp load is 15 Amp.

    These temperature limit controllers are ideal for indoor use with an environmental exposure operating range of 32° F to 150° F (0° C to 65° C) and a storage range of -4° F to 176° F (-20° C to 80° C). Relative humidity environmental exposure is less than 95% non-condensing temperatures.

    Common industry applications: Laboratory, Petrochemical, General Manufacturing, Agriculture, Chemical, Food & Beverage, Plastics

    Key benefits
    • Adds high-limit cutoff safety
    • Benchtop, plug-and-play design
    • Suitable for indoor use
    • Max. amp load of 15 Amp
    • Accuracy +/-1% full scale
    • Audible alarm
    • Must be used with temperature controller
    • Control module: FM-approved with mechanical relay

    Disclaimer:

    This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility.

    Additional Information

    More Information
    Temperature ReadingFahrenheit (°F)
    Voltage120v
    Dimensions5.25" L x 2.25" W x 5" H
    Weight2 lbs.
    ManufacturerBriskHeat
    ModelHL120JA-F
    Note:*Must be used with a temperature controller
    Q & A
    Customer Questions
    Did you find what you were looking for?

    You May Also Like