UN Rated 5 Gallon (18 Liter) Rectangular Blue HDPE Plastic Tight Head Container, Tamper Evident 70mm SC-76RTE (6TPI), Unvented
This UN Rated (UN3H1/Y1.8/100) 5 gallon (18 liter) blue high density polyethylene (HDPE) plastic rectangular tight head container has a tamper evident 70mm (Buttress 6TPI) neck finish. This pail comes with a movable handle. Rectangular plastic tight head containers are ideal for storing paints, coatings, adhesives, mastics, additives, agricultural chemicals, viscous products and other applications. They ensure secure and dependable shipment and storage of liquid products.
**Cap not included. Poker Chip Dust Cover Installed.
The 57WCTE is a Rieke® SC-76RTE, 70mm natural polyethylene (PE) plastic tamper evident screw cap (Buttress 6TPI) with 3/4" (20mm) threaded opener (reducer). This plastic pail closures offers a tight seal as well as easy access to a container for filling an
The 57WCAR is a Rieke® SC-76R, 70mm natural polyethylene (PE) plastic screw cap (Buttress 6TPI) with 3/4" (20mm) threaded opening (reducer) and a GK-98W gasket. This plastic pail closures offers a tight seal as well as easy access to a container for fillin
The 57WCAN is a 70mm natural polyethylene (PE) plastic buttress screw cap (Buttress 6TPI) with white gasket and Flexspout. The 57WCAN offers a tight seal as well as easy access to a container for filling and dispensing. This cap can be tightened and opened wit
57WCAT is a Rieke® SC-76RTE-TFE, 70mm tamper evident natural polyethylene (PE) plastic screw cap (Buttress 6TPI) with 3/4" (20mm) threaded opening (reducer) and a Micro-Porous Gauze Vent that allows two-way venting for either pressure or vacuum relief. Thi
The 57WPAR is a 70mm natural polyethylene (PE) plastic screw cap 6TPI with 3/4" (20mm) threaded opening (reducer) and a ethylene propylene diene monome (EDPM) gasket. This plastic pail closure offers a tight seal as well as easy access to a container for filli
This Rieke® SC-76R-143, 70mm white polyethylene (PE) plastic screw cap (Buttress 6TPI) has a 3/4" (20mm) threaded opening (reducer) and a Micro-Porous Gauze Vent that allows two-way venting for either pressure or vacuum relief. This Rieke 70mm screw cap of
The 57WPTE is a 70mm natural tamper evident polyethylene (PE) plastic screw cap 6TPI with 3/4" (20mm) threaded opening (reducer) and a ethylene propylene diene monome (EPDM) gasket. This plastic pail closure offers a tight seal as well as easy access to a cont
The 57WFLO is a Rieke 3/4" Flo-Rite plastic faucet made out of FDA-approved polyethylene (PE) plastic. The 57WFLO is designed to screw into 3/4" threaded openings and can be used to dispense most non-flammable liquids and chemicals.
This 70mm buttress cap features a gasket for a secure, leak-proof seal. This plastic closure provides both a tight seal and easy access to a container for filling and dispensing. Caps are essential for preventing inventory loss from leaks or product contaminat
The Rieke W399-PT01 70mm preset 14-1/2" torque wrench closing tool has a 10ft lb. setting and is suitable for FS-60, FS-70 & FS-80 70mm screw caps. This torque wrench comes with a certificate of calibration. Remove the guesswork out of torque measurements for
The Rieke W-397 70mm Aluminum Screw Cap Wrench (Tightening Tool) provides for quick and safe opening and closing of containers. This wrench is for applying and removing FS-60, FS-70, FS-80 and FS-80T 70mm screw caps.
30WEZP is a 5 gallon continuous flow plastic pail pump that dispenses approximately 6 fl. oz. (180 ml) per stroke. The dip tube is fixed and the anti-drip nozzle prevents spillage or material waste. There is low pressure at the nozzle to ensure even distributi
This UN Rated (UN3H1/Y1.8/100) 5 gallon (18 liter) blue high density polyethylene (HDPE) plastic rectangular tight head container has a tamper evident 70mm (Buttress 6TPI) neck finish. This pail comes with a movable handle. Rectangular plastic tight head containers are ideal for storing paints, coatings, adhesives, mastics, additives, agricultural chemicals, viscous products and other applications. They ensure secure and dependable shipment and storage of liquid products.
Key benefits:
Made of FDA Compliant high density polyethylene (HDPE) plastic
5 gallon (18 liter) capacity
5.4 gal. (20.4 liter) overflow capacity
70mm neck finish
UN Certification of UN3H1/Y1.8/100 for the shipping and handling of hazardous materials
High density polyethylene (HDPE ) is the most commonly used resin. This economical plastic has good impact and chemical resistance, is naturally translucent and flexible. It is typically used for personal care products such as shampoo bottles. Adding color will give HDPE an opaque look that will result in an increase in weight and rigidness. We have a variety of these rigid and tough high density polyethylene products in stock, from containers, pails, bottles, caps, tubs and jugs. HDPE works well in below freezing temperatures. HDPE heat compatibility varies. Maximum fill temperature is generally around 145°F; however, testing is recommended with your specific product and application.
Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.
Additional Information
More Information
Capacity
5 gal.
Color
Blue
Material
HDPE
Label Panel Dimensions
38-1/4" W x 8-3/16" H
Dimensions
11-25/32" L x 9-3/4" W x 14-13/32" H
Weight
3.354 lbs.
Case Pack
48 ea.
Case Dimensions
48" L x 44" W x 48" H
Case Weight
160.992 lbs.
Pallet Pack
96 ea.
Pallet Dimensions
48" L x 44" W x 86" H
Pallet Weight
321.984 lbs.
Country of Manufacture
United States
Condition
New
Closure
Tight Head (Closed)
Fittings
70 mm (Buttress 6TPI)
UN Rating Liquid
UN3H1/Y1.8/100
Note:
**Cap not included. Poker Chip Dust Cover Installed.
Q & A
Customer Questions
What can plastic tight head square and rectangular containers store?
Plastic tight head square and rectangular containers are ideal for storing liquids, paints, adhesives, additives, chemicals, and more.
Can I store gasoline in this plastic tight head square and rectangular container?
We cannot confirm that this container can safely store diesel and gasoline for extended periods. We do offer Type I and Type II metal and poly safety cans that are specifically designed to store flammable liquids (like gasoline). These cans provide the proper ventilation for flammables and are made to withstand the corrosive effects of these liquids. Please note our disclaimer, which states that "[w]e are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us."
What kind of accessories do you offer for plastic tight head square and rectangular containers?
The simple conversion of measurement of 5 gallons is 0.803 cubic feet. However, this is for the nominal capacity of the pail. The actual (overflow) capacity of a pail can vary from model to model. To calculate the full volume in cubic feet, for cylinder pails, you need to multiply π (3.14) x the pail radius (in feet) x the pail height (in feet). To calculate the volume for square pails, multiply the pail's length x width x height (in feet).
Can you ship internationally? Where are you located?
The Cary Company online ordering platform is only set up to ship within the United States. For international shipments, please contact us at 630.629.6600 or Sales@thecarycompany.com, and we will be happy to process your order. Our main warehouse and office are located in Addison, Ill. We also have warehouses in across the United States that you can see here. Thank you for choosing The Cary Company.
Do you offer labeling services?
Yes, we offer design services, as well as in-mold labeling, screen printing, label printing and application services. You can request a quote from our design team by calling 630.629.6600 or emailing Sales@TheCaryCompany.com. For more information regarding the services we offer, please go to our Design Services page. Thank you for choosing The Cary Company.
Did you find what you were looking for?
To request a quote, enter the Part# along with the quantity. To complete the request, fill out the entire form and hit "Submit".