Part # : 26WR2C
275 Gallon IBC Tote, Standard Reconditioned, UN Rated, 2" Camlock Valve, Steel or Composite Pallet
UN Rated (UN31HA1/Y), Reconditioned Bottle (tank), Cage, and Steel or Composite Pallet
The 26WR2C is a reconditioned 275 gallon IBC with a 2" Camlock valve. Also known as an intermediate bulk container or tote, this industrial container holds the same capacity as five 55-gallon drums in less space and features a 2" Camlock valve allowing for easy disconnect, adding to ease of use. Camlock is usually used for quick connects (like hoses), while NPT is for threaded connections. The 26WR2C has three components: a reconditioned bottle, a reconditioned cage, and a reconditioned steel or composite pallet. Please note the placard of this item may come in either steel or corrugated material. The 26WR2C features a 6" opening/top cap and has a UN rating of UN31HA1/Y. Standard reconditioned indicates that the bottle shows minimal to no staining from prior use. For those seeking a consistent cosmetic option, standard reconditioned bottles are an appealing choice.
**Reconditioned bottles are not recommended for food applications.
View Entire Selection of Plastic IBC Totes
View Entire Selection of Plastic IBC Totes
- Quantity Qty Price
- 1 $262.870 ea.
- 2 $251.090 ea.
- 4 $236.350 ea.
- 8 $226.050 ea.
- 12 $211.330 ea.
- Pallet Pack: 2 ea.
Related Products
| Product | Price | Qty | Request |
|---|---|---|---|
 6" Top Fill Port Screw Cap, 2" NPT Plug for IBC Totes This 6" top fill port cap has a 2" NPT center plug and can be used for IBC totes. This lid has an EPDM gasket and is designed to fit most plastic IBCs. This port fill screw cap works well as a replacement for worn or damaged IBC lids. This lid is a universal t |
| | |
 6" Blue Top Fill Port Cap, Two 2" NPT Plugs This 6" blue top fill port screw cap features two 2" NPT plugs. One hole can be used for venting while the other can be used to fill or empty the IBC tote. This lid can be used as a replacement for worn or damaged IBC port fill caps. Plugs include gaskets. |
| | |
 6" Blue Top Fill Port Cap, 2" Buttress Plug, EPDM Gasket This 6" blue screw top fill port cap is designed for use on most IBC totes. This cap features an ethylene propylene diene monomer (EPDM) gasket that ensures a tight, secure seal and works well as a replacement for worn or damaged IBC lids. Cap includes a 2" bu |
| | |
 2" Snap-On Camlock Dust Cap for IBC Tote Valves This 2" black snap-on camlock dust cap fits compatible IBC tote valves. Made of reinforced polyethylene (PE), this camlock-style dust cap features a thick ethylene propylene diene monomer (EPDM) gasket for a leak-tight seal. Six-prong design ensures the cap st |
| | |
 2" Camlock Dust Cap, Plastic Ears, for IBC Tote Valves This 2" Camlock quick disconnect black dust cap fits compatible IBC tote valves. Made of reinforced polypropylene (PP), this coupler dust cap features a thick ethylene propylene diene monomer (EPDM) gasket for a secure seal. Two yellow locking clips ensure the |
| | |
 2" Camlock Dust Cap, Metal Ears, for IBC Tote Valves The 26WCDC is a 2" female Camlock coupler dust cap with two locking clips. This cap will work with 2" male Camlock with 2" BSP, 2" male Camlock with 2-1/8" BSP, and 2" male Camlock adaptor. Dust caps keep valves from accumulating dust and dirt during storage a |
| | |
 2" Female Camlock to 3/4" NHR Male Garden Hose Adapter 26WC2H is a 2" female camlock to 3/4" US NHR male garden hose thread to convert a 2" male Camlock Part A IBC valve to USA garden hose thread. Manufactured from FDA food grade materials in a strong glass coupled Polypropylene under an ISO 9000 Quality Managemen |
| | |
 8' PVC Hose Kit, Aluminum Nozzle, 2" Female Camlock, for Drums or IBC Totes IBC Kit with 8' Hose and Aluminum Nozzle for 2' Camlock Valves |
| | |
 Adjustable IBC Fill Port Cap Wrench for 1/2" Drive Adjustable IBC Fill Port Cap Wrench for 1/2' Drive |
| | |
 42" HDPE Suction Tube for 275 Gallon IBC Tote Top Fill Port Valve 42" suction tube assembly is designed for use with closed container valve systems on 275 gallon IBC tote top fill port valves. Used to help pump fluid from the IBC tote and discharge through the top fill port valve (sold separately), this 1" diameter tube is m |
| | |
 Green Tamper Evident IBC Tote Valve Security Seal This green IBC tote valve security seal clip locks onto the IBC valve knob to provide a tamper-evident closure. Made of durable polyethylene (PE), this clip ensures that your IBC tote contents have not been compromised and offers EPA compliant security. |
| | |
 Burp-Free Drum & IBC Tote Funnel - UltraTech 0651 The 26WIBF (UltraTech 0651) is a standard burp free drum funnel for 2" bungs. This funnel is made of polyethylene, which has excellent chemical resistance, and also features a built-in vent to prevent splashing or "burping" when pouring liquids into containers |
| | |
 14 Gauge Steel IBC Tote Funnel with Catch Screen The 26WTFL is a 14 Gauge Steel Tote Funnel with Catch Screen that is used as a fluid collection system and designed to fit on IBC totes and barrels. This rectangular shaped drain funnel measures in at 14" x 24" x 4" and has a 3" diameter drain spout.The catch |
| | |
 Burp-Free Drum & IBC Tote Funnel (Large) - UltraTech 0656 The 26WIFB (UltraTech 0656) is a large burp free IBC tote and drum funnel for 2" bungs. This funnel is made of polyethylene, which has excellent chemical resistance, and also features a built-in vent to prevent splashing or "burping" when pouring liquids into |
| | |
 275 Gallon IBC Tote Fluxwrap™ Industrial Cooling Jacket Keep heat away with the 19BFW2, a 275 gallon Fluxwrap™ by North Slope Chillers jacket with insulation used to chill totes. This tote cooling jacket has a multi-channel fluid path that permits maximum cooling liquid flow with low pressure. It provides ful |
| | |
 275 Gallon IBC Tote Heater, Adj. Thermostat up to 145° F, 120V, 1440W - Powerblanket® The 19WHTB is a 275 gallon tote blanket heater with an adjustable thermostat. This 275 gallon tote heater blanket can deliver 1440 watts of heating power. The 19WHTB tote blanket heats to a temperature of 145° F, providing convenient temperature control fo |
| | |
 275 Gallon IBC Tote / 55-Gal Drum Pallet Insulated Cover The 19WTTQ is an insulated tote and drum pallet quilt. Quilts are designed to protect against freeze, heat or condensation damage through insulation and no electricity. The 19WTTQ can be used on a 275 Gallon tote, as well as 4 drums on a pallet, and is great f |
| | |
 Ultra-IBC Spill Pallet Plus® 1158 (With Drain) This IBC spill pallet has a 365-gallon sump capacity and can handle up to 8,500 lbs. (3,856 kg.) of uniformly distributed loads. Spill pallet is made of tough, chemical-resistant polyethylene that will not rust or corrode, and includes a built-in drain. Low pr |
| | |
 IBC Yellow Spill Containment Unit, No Drain The 56BHS5 is a Yellow IBC Spill Containment Unit made out of high-density polyethylene (HDPE) plastic, with a load capacity of 10,000 lbs. and a spill capacity of 400 gallons. |
| | |
 Single IBC Hard Top Spill Pallet with Drain - UltraTech 1161 The Ultra-IBC Hard Top Spill Pallet provides spill containment for IBCs, tanks, and other large containers. The all-polyethylene roll top unit provides both protection from unauthorized access as well as sun, rain, and the elements. Simply place your IBC or ta |
| |
- Specifications
- The 26WR2C is a reconditioned 275 gallon IBC with a 2" Camlock valve. Also known as an intermediate bulk container or tote, this industrial container holds the same capacity as five 55-gallon drums in less space and features a 2" Camlock valve allowing for easy disconnect, adding to ease of use. Camlock is usually used for quick connects (like hoses), while NPT is for threaded connections. The 26WR2C has three components: a reconditioned bottle, a reconditioned cage, and a reconditioned steel or composite pallet. Please note the placard of this item may come in either steel or corrugated material. The 26WR2C features a 6" opening/top cap and has a UN rating of UN31HA1/Y. Standard reconditioned indicates that the bottle shows minimal to no staining from prior use. For those seeking a consistent cosmetic option, standard reconditioned bottles are an appealing choice.
Material:
High density polyethylene (HDPE ) is the most commonly used resin. This economical plastic has good impact and chemical resistance, is naturally translucent and flexible. It is typically used for personal care products such as shampoo bottles. Adding color will give HDPE an opaque look that will result in an increase in weight and rigidness. We have a variety of these rigid and tough high density polyethylene products in stock, from containers, pails, bottles, caps, tubs and jugs. HDPE works well in below freezing temperatures. HDPE heat compatibility varies. Maximum fill temperature is generally around 171°F; however, testing is recommended with your specific product and application. Distortion occurs between 220° to 250° F.Disclaimer:
This information has been provided as a general guide. It is the customer's responsibility to select the proper container for product and application compatibility. The Cary Company does hereby disclaim any and all warranties, expressed or implied, including any implied warranty of merchantability or fitness for a particular purpose or use. We are not responsible for consequential damages arising from customer's selection and use of containers, container and label dimensions, and/or closures supplied by us.Additional Information
More Information Capacity 275 gal. Color Natural Material HDPE Dimensions 48" L x 40" W x 46" H Pallet Pack 2 ea. Shipping For quantities over 12, please call for shipping rates. Country of Manufacture United States Condition Reconditioned Recondition Grade Standard Closure Various Fittings 2" Camlock Gasket Various Gaskets UN Rating Liquid UN31HA1/Y Note: **Reconditioned bottles are not recommended for food applications.
View Entire Selection of Plastic IBC Totes - Q & A
- Customer Questions
- Videos
-
Videos
You May Also Like
- Quantity Qty Price
- 1 $397.550 ea.
- 2 $369.100 ea.
- 4 $354.350 ea.
- 8 $333.370 ea.
- 12 $321.480 ea.
275 Gallon IBC Tote, Standard Reconditioned, UN Rated, 2" NPT Valve, Steel or Composite Pallet
Part #: 26WTOT- Quantity Qty Price
- 1 $262.870 ea.
- 2 $251.090 ea.
- 4 $236.350 ea.
- 8 $226.050 ea.
- 12 $211.330 ea.
- Quantity Qty Price
- 1 $414.570 ea.
- 2 $380.010 ea.
- 4 $364.850 ea.
- 6 $350.790 ea.
- Quantity Qty Price
- 1 $317.140 ea.
- 2 $304.470 ea.
- 4 $295.490 ea.
- 8 $289.490 ea.
- 12 $280.060 ea.
- Quantity Qty Price
- 1 $364.550 ea.
- 2 $353.110 ea.
- 4 $331.730 ea.
- 6 $315.710 ea.
- Quantity Qty Price
- 1 $413.130 ea.
- 2 $380.930 ea.
- 4 $365.730 ea.
- 6 $351.640 ea.
- Quantity Qty Price
- 1 $317.140 ea.
- 2 $304.470 ea.
- 4 $295.490 ea.
- 8 $289.490 ea.
- 12 $280.060 ea.
- Quantity Qty Price
- 1 $364.550 ea.
- 2 $353.110 ea.
- 4 $331.730 ea.
- 6 $315.710 ea.
- Quantity Qty Price
- 1 $397.620 ea.
- 2 $369.170 ea.
- 4 $354.420 ea.
- 8 $333.440 ea.
- 12 $321.550 ea.
- Quantity Qty Price
- 10 $353.200 ea.
- Quantity Qty Price
- 1 $338.010 ea.
- 3 $326.910 ea.
- 6 $318.750 ea.
- 9 $297.490 ea.
- 18 $278.900 ea.
- Quantity Qty Price
- 1 $338.010 ea.
- 3 $326.910 ea.
- 6 $318.750 ea.
- 9 $297.500 ea.
- 18 $278.900 ea.
- Quantity Qty Price
- 30 $323.750 ea.
- 60 $303.500 ea.
Product Reviews
John Julian, 09 April 2025
A number of the top caps were missing the o ring sealer.
Verified, collected by Trustpilot
David Anonymous, 04 August 2022
The product looked good coming in the door. We have not put them into service yet.
Verified, collected by Verified Reviews
anonymous anonymous, 21 October 2021
Good
Verified, collected by Verified Reviews
anonymous anonymous, 04 February 2021
Delivered exactly as described.
Verified, collected by Verified Reviews
anonymous anonymous, 27 September 2020
Good value but will not buy again
Verified, collected by Verified Reviews